All security systems should be regularly maintained if you wish them to work as designed. In some cases your
insurers may not honour any insurance claims if you cannot prove that your system has been regularly maintained
to the correct standard. Our maintenance program can be applied to Intruder, Fire, CCTV, Access Control and Gate
Whether it be a simple electronic keypad operated system or a more advanced swipe card/proximity/biometric
system. Ongoing preventative and corrective maintenance is vital if you wish the system to continue to do what
you originally intended it to do, that is, control the access of persons in and out of a building.
Door entry systems whether they are audio only or video with audio need to be maintained. They often get
and vandalised and therefore need regular maintenance to keep them working as intended. In most cases these
systems are interfaced with a locking system on that door. If that locking system is not checked and
where necessary it will not lock properly thus the system is compromised.
With the advent of dedicated computer controlled and IP access controlled systems, maintenance is all the
important. Who will talk you through a software issue when you’ve forgotten how to enrol or bar a token? Who
will talk you through setting up a new calendar schedule? Who will come and repair the electronic locking
on that door when it fails to operate correctly? These are all issues that would be taken care of with a
suitable maintenance program.
Gate & Door Automation
Following recent unfortunate bad press about the use of gate and door automation it is vital that your systems
work as designed. Failure to keep your systems working correctly could result in injury to persons or vehicles.
Whether you have standard gate rams, underground motors, vehicle barriers, or overhead door operators all these
systems should be interfaced with the correct safety sensors to prevent the gates/doors from hitting anyone.
Occasionally these systems are misused and vandalised which can often cause damage to the gates/doors/barriers.
It is therefore essential that these systems are regularly checked for correct operation. All safety sensors
whether they be surface mounted or underground loops need to be tested for efficiency in their application.
Regular maintenance of all these systems would make sure that are all working as designed. Any essential
or replacement parts would be identified and costs advised prior to any installation. We aim to be cost
effective, professional and most importantly competitive.